Compare Products

The heavy-duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides over 900kg of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding, product features vehicle, pedestrian, or stock gate access control.

• 907kg holding force
• Operates under preload up to 45kg
• Automatic dual voltage - no field adjustment required
• Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
• Self-aligning receiver (+/- 12mm horizontally) helps compensate for gate misalignment and sag
• Tamper-resistant cast housing
• Optional latch status monitor
• Fail Secure - remains locked when power is cut
• Surface mount

SGL1-FSM SPEC SHEET

The electronic swing 351 M. 80 motorised lock is equipped with an innovative quiet electric motor drive and is designed for the locking of swing, double swing, and carousel doors. It is suitable for horizontal or vertical installation in the door frame.

The door contact and the armature contact are designed as potential-free switching contacts. The door contact is switched magnetically when the door is closed. The armature contact can be used to monitor the locking status.

The 351 M. 80 drop bolt works according to the fail-safe unlocked operating principle. If the power is shut off or the power fails, the door can be opened. If power is connected and the door is in the inch Door closed inch position for at least 1 second.

• Very quiet locking and unlocking, silent during permanent release
• Suitable, e.g. for double-action swing doors and single-action swing doors, interlocking doors and special doors
• Suitable as a supplementary locking system for installation in fire doors
• Vertical and horizontal universal installation position in the door frame or the door leaf
• Holding force of 5000 N
• Safe unlocking under pre-load of up to 5000 N
• 12V DC to 24V DC multi-voltage, controlled DC voltage
• Monitoring contact and armature contact integrated
• Compatible with Model 351U

• Handing Universal
• Monitoring contact (RR): Yes
• Diode (05): Yes
• Fail-unlocked: Yes
• Input operating voltage ± 10%
• Max. current consumption with motor operation (approx. 1 s): 12 V DC 880 mA
• Max. start current consumption with motor operation (approx. 1 s): 24 V DC 270 mA
• Max. current consumption in continuous operation: 12 V DC 480 mA
• Max. current consumption in continuous operation: 24 V DC 270 mA
• Max. pre-load: 510kg
• Anchor contact: Yes
• Break-in resistance: 510kg
• Material housing: Stainless steel
• Operating temperature range: -15 °C to +50 °C
• Bolt throw 10 mm

Dimensions:

• Height: 200 mm
• Width: 25 mm
• Rebate clearance: 3 mm (2 mm – 4.5 mm)
• Depth: 42 mm

The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper. Pre-load is a common condition that is caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use. 

Standard features include multi-voltage 10 - 30Vdc and field changeable settings from fail-safe to fail-secure. Built to last, this is a premium locking solution that has been tested over 2 million cycles and boasts unique features like no other available on the market today

Applications

• Suitable for high traffic areas and where doors are subjected to side load (pre-load). Fire rated for fire door applications and suits open-in or open-out door installations. The ES9000 can be integrated into various access control systems.

• Operates under pre-load up to 25kg
• Easy field selectable fail safe/fail secure
• Multi voltage 10Vdc to 30Vdc
• 1300kg holding force
• 2.5million cycles endurance rating
• Full monitoring
• Continuously Rated Solenoid
• Latch keeper is significantly quieter in operation
• Includes standard 15.5mm lip
• Mounting tabs as standard
• Non handed - field changeable to required configuration
• Australian designed and made
• Suplied in trade pack

119001-000 CATALOGUE