Wired IR Motion Detector with an Additional K-Band Microwave Sensor

Wired IR Motion Detector with an Additional K-Band Microwave Sensor - MotionProtect Plus Fibra

MotionProtect Plus Fibra is a wired motion detector with an additional K-band microwave sensor. It can recognize movement at a distance of up to 12 meters* (high sensitivity for EN compliance). Together with the IR sensor, it applies a radio-frequency scan that filters out thermal interference. Does not respond to pets up to 50 centimeters tall and weighing up to 20 kilograms. For indoor installation.

MotionProtect Plus Fibra works as part of the Ajax system, exchanging data with the hub using the secure Fibra wired protocol. The wired connection range is up to 2,000 meters when using a U/UTP cat.5 twisted pair.


*Note - The detector is compatible with Hub Hybrid (2G) and Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, and uartBridge are not provided.

Dimensions:

110 x 65 x 50 mm

• Pet Immunity
• PIR Sensor
• K-band Microwave Sensor
• Motion Detection Distance - Up to 12 Meters
• False Alarm Prevention 
• Tampering Alarm - Alerts of attempts to detach the detector from the surface or remove the mounting panel.
• Protection against Forgery - Device authentication

MotionProtect Plus Fibra SPEC SHEET