Compare Products

Wired Module to Integrate Wired Third-Party Detectors and Devices - MultiTransmitter Fibra

MultiTransmitter Fibra is an integration module connecting third-party wired devices to an Ajax security system. It has 18 zones for connecting NC, NO, EOL, 2EOL, and 3EOL devices.

MultiTransmitter Fibra is equipped with two tampers for protection against dismantling. The device is powered from the 100-240 V~ mains, and can also be powered from the 12 V backup battery. It can supply 10.5-15 V power to connected devices.

MultiTransmitter Fibra works as part of an Ajax security system, exchanging data with the hub using the secure Fibra wired protocol. The wired connection range is up to 2,000 meters when using a U/UTP cat.5 twisted pair.

*Note - The integration module is compatible with Hub Hybrid (2G) and Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, and uartBridge are not provided.

Dimensions:

196 x 238 x 100 mm

• 3 independent 12V power lines - for fire and intrusion detectors
• Instant detection of wired connection loss (EOL)
• 18 zones of connecting detectors - NO, NC, EOL, 2EOL, 3EOL
• Fibra line connection - up to 2,000m
• Data-rich notification
• Remote control and setup

MultiTransmitter Fibra SPECS SHEET

Ajax Case B   - Case (430x400x133) Fibra

Case is the casing designed to install one or more compatible Ajax devices. The complete set includes the tamper board to protect devices from sabotage. Case has fasteners to fix the cables and channels for convenient cable organization. The casing is intended for indoor use only.

Case is produced in several versions. Each model has a different number of slots depending on the device combination:

• Case A (106) - one Ajax device;
• Case B (175) - up to two Ajax devices;
• Case C (260) - one Ajax device and 7 Ah battery;
• Case D (430) - up to eight devices and two 18 Ah batteries.

Devices:

LineSplit, LineProtect, MultiRelay, LineSupply(45w), Hub Hybrid (4G)

Dimensions:

430x400x133 mm

• Organised Cable management - perforations and holes for cable fixing and routing
• Perfect installation - bubble level and enlarged mounting holes
• Sabotage protection - with a tamper alarm
• Safe hole drilling - stoppers and recesses for drilling

Ajax Case D Spec sheet

Wireless Indoor Siren - Home Siren

HomeSiren Fibra is a wired siren for indoor installation. The device notifies of events and alarms with an LED indicator and sound volume of up to 105 dB. Supports connection of an additional wired LED.

HomeSiren Fibra works as part of an Ajax system, exchanging data with the hub using the secure Fibra wired communication protocol. The connection range is up to 2,000 meters when using the U/UTP cat.5 twisted pair.


*Note -The siren is compatible with Hub Hybrid (2G) and Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, and uartBridge are not provided. Integration with other security systems is not provided either.

Dimensions:

90.5 x 90.5 x 33 mm

• Adjustable volume of alarms and notifications
• Adjustable alarm duration
• Delay and security mode changing indication
• Fibra line connection - up to 2,000m
• Door opening notifications
• External LED connection
• Remote control and setup

HOMESIREN Fibra SPEC SHEET

Wired Pet Immune Motion Detector - MotionProtect

MotionProtect Fibra is a wired motion detector. It can recognize motion at a distance of up to 12 meters*. It does not respond to pets up to 50 centimetres tall and weighing up to 20 kilograms. Indoor installation only.

MotionProtect Fibra works as part of the Ajax system, exchanging data with the hub using the secure Fibra wired protocol. The wired connection range is up to 2,000 meters when using a U/UTP cat.5 twisted pair.

MotionProtect Fibra is a member of the product line of wired Fibra devices. The installation, sale, and administration of these devices are performed only by accredited Ajax partners.

*Note - The detector is compatible with Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, and urtBridge are not provided. 

Dimensions:
110x65x50 mm

• Connecting to a hub via bus method
• Up to 2,000m of two-wa encrypted communication
• adjustable polling interval
• tampering alarm notification
• remote configuring via a smartphone or desktop app
• adding to the security systems via QR code or bus scanning

MotionProtect Fibra SPEC SHEET