Compare Products

ES6000 Hook Lock is suitable for swinging doors, sliding doors and is easily attached to wood or steel door frames. ES6000 is a heavy-duty design with its high preload (side load) capability of up to 300 kg, high holding force of up to 700 kg and up to 4 hours fire rating. 

• Power to Open or Power to Lock versions available 
• Side Load (Pre-Load) Capable: Operates freely with up to 300 kg of side pressure 
• Self-Latching: Will self-latch without power for fire applications, 680kg holding force 
• Robust Construction: Stainless steel components used 
• Low Profile: Will protrude only 40mm into the door headroom 
• Multi Voltage: Automatic selection 12 to 30Vdc with back EMF protection and reverse polarity protection 
• Multi Orientation: Can be mounted vertically or horizontally 
• Low Current Consumption Monitored: locked and unlocked. Tested to the 300kg preload capability 
• Applications: Heavy Duty Applications, Sliding & Swing Door Applications 
• High Air Pressure Environments (High Pre Load rating) Standards and Compliance Successfully fire rated up to 2hrs on fire door assemblies per AS1905.1. 2005 (Part 1: Fire-resistant door sets).

The EL110 Cabinet lock is a small cast aluminium lock designed for cabinets having either swing or sliding doors, where access control is a requirement and keys are not the total answer. The Cabinet Lock, designed to hold 150 kgs (330 lbs), can be mounted both vertically and horizontally.

The EL110 can be controlled by any existing access control system or simply controlled through a remote key pad or key switch, and is suitable for installations that have only one or multiple cabinet applications.

Application
Cabinet locking for either swing or sliding cabinet doors

• Pre-set to power to lock
• Mode conversion allows the lock to be changed from inch power to lockinch to inch power to openinch
• flexible alignment with a 5mm xy adjustment after installation
• low current consumption using only 187mA with 12 volts DC
• industry standard and can be connected to any key switch, key pad, card reader or access control system
• 12 volts DC
• Solenoid rated for continuous use
• c-tick and CE compliant
• approval electromagnetic compatibility - en500181 1 exempt

LT111301-000 INSTALLATION SHEET