Compare Products

Wired Glass Break Detector with a Microphone - GlassProtect Fibra

GlassProtect Fibra is a wired glass break detector. Designed for indoor use. Supports connection of a third-party detector with a normally closed (NC) contact type.

GlassProtect Fibra works as part of the Ajax security system, exchanging data with the hub using the secure Fibra wired protocol. The communication range is up to 2,000 m when connected via twisted pair U/UTP cat.5.

*Note - The detector is compatible with Hub Hybrid (2G) and Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, cartridge, and third-party control panels are not provided.

Dimensions:

90.5 x 21 x 18.5 mm

• Connecting to the hub via bus method
• up to 2,000m of two-way encrypted communication
• Adjustable polling interval
• Adding to the security systems via QR code or bus scanning
• Remote configuring via the smartphone or desktop app
• Tampering alarm notifications
• False alarm prevention - DualTone - Two-factor glass break verification software algorithm: by low and high frequencies. 
  

GlassProtect Fibra SPEC SHEET

Wired IR Motion Detector with an Additional K-Band Microwave Sensor - MotionProtect Plus Fibra

MotionProtect Plus Fibra is a wired motion detector with an additional K-band microwave sensor. It can recognize movement at a distance of up to 12 meters* (high sensitivity for EN compliance). Together with the IR sensor, it applies a radio-frequency scan that filters out thermal interference. Does not respond to pets up to 50 centimeters tall and weighing up to 20 kilograms. For indoor installation.

MotionProtect Plus Fibra works as part of the Ajax system, exchanging data with the hub using the secure Fibra wired protocol. The wired connection range is up to 2,000 meters when using a U/UTP cat.5 twisted pair.


*Note - The detector is compatible with Hub Hybrid (2G) and Hub Hybrid (4G). Connection to other hubs, radio signal range extenders, ocBridge Plus, and uartBridge are not provided.

Dimensions:

110 x 65 x 50 mm

• Pet Immunity
• PIR Sensor
• K-band Microwave Sensor
• Motion Detection Distance - Up to 12 Meters
• False Alarm Prevention 
• Tampering Alarm - Alerts of attempts to detach the detector from the surface or remove the mounting panel.
• Protection against Forgery - Device authentication

MotionProtect Plus Fibra SPEC SHEET

The NVR5000-AI/ANZ series offers outstanding performance and high-grade recording technology that make it ideal for IP video surveillance applications. It has a powerful processor, that offers high access and forwarding bandwidth and strong decoding capabilities that together produce unimpeded streams. 

Thanks to its built-in AI chip and Dahua's advanced deep learning algorithms, the NVR supports a variety of AI functions, such as high-precision face recognition and perimeter protection. They shorten the response time to events and make videos more interactive. This NVR is compatible with numerous third-party devices, making it a great solution for surveillance systems that work with Video Management Software (VMS).

• Smart H.265+/H.265/Smart H.264+/H.264/MJPEG decoding format.
• 32-channel 1080p self-adaptive decoding capability.
• Max. 384 Mbps incoming/recording/outgoing bandwidth.
• AI by recorder: 2-channel face detection and recognition, 4-channel perimeter protection, and 8-channel SMD Plus.
• AI by the camera: Face detection and recognition, perimeter protection, SMD Plus, metadata, ANPR, stereo analysis, heat map, and people counting.
• Security baseline 2.3.

DHI-NVR5864-AI/ANZ SPECS SHEET