Compare Products

• High quality image with 5MP, 1/2.7"CMOS sensor
  
• 5MP (2880*1620)@30/25fps; 4MP (2560*1440)@25fps;3MP (2304*1296)@25fps; 2MP (1920*1080)@ 30/25fps;
• Ultra 265, H.265, H.264, MJPEG
• Intelligent perimeter protection, include cross line, intrusion, enter area, leave area detection
• Based on target classification, smart intrusion prevention significantly reduce false alarm caused by leaves, birds and lights etc., accurately focus on human and, motor vehicle and non-motor vehicle
• LightHunter technology ensures ultra-high image quality in low illumination environment
• 120dB true WDR technology enables clear image in strong light scene
• Built-in Mic
• Built-in Speaker
• Smart IR, Up to 50 m (164 ft) IR and 10m (33 ft) warm light distance
• Supports 256 G Micro SD card
• IP66 protection
• Support PoE power supply

IPC675LFW-AX4DUPKC-VG SPEC SHEET

The Em Rex Cover is used with the Em RexUnit to deter unintended / malicious activation of the unit when it is installed in a public area. The unitis passive and has no electronics that could fail and cause the unit not to operate. The Cover has two sets of outputs which are used to monitor the operation of the cover being lifted. One set of contacts connects to the piezo (buzzer) input on the Em Rexunit and the second to the Access Control System for monitoring. The cover is designed to clip into place when closed, to make the operation of it a deliberate action, as it will not lift without reasonable force. This will prevent any accidental or unintended operation of it. The Em Rex Unit fits into the base of the cover before both parts are fixed to the wall, preventing it being removed without unscrewing it from the wall. It is also available in an un-monitored form if no indication of activation is required.

• Designed to complement the Em RexUnit and comply with local codes for emergency egress
• Two outputs; one set for local audible indication and one set for status monitoring
• The Em-Cover is secured behind the Em Rex Unit to prevent removal.
• The cover is designed to latch closed so as to make the operation of it a deliberate action.
• The cover is made of polycarbonate so as to withstand long term operation without any deterioration.
• Minimal moving parts.
• Text and graphics will not deteriorate over time and the unit is easily cleaned.

• Overall dimensions; 92mm (w) x 153mm (h) and fits a single gang electrical flush box
• Switching voltage max is 30Vdc, 200mA
• Output for connection to the Em Rexfor audible indication
• N/C output for status monitoring (opens on activation)